to order call tel: (630) 628-9999 fax:(630) 628-9922 300 w factory road toll free: (888) 797-8652 addison, il 60101 email: sales@powervolt.com stepperpower ? rohs the power supply for stepping motors series: bvu6000 & pv5000 fully compatible with pacific scientific (and other) stepping motor drivers series 5200, 5300, 5400, 6400. space saving compact modules provide mounting studs for m otor drivers. integral motor and logic -power (where applicable). models to drive one or two motors. 120vac or 240vac models; input taps to match actual line voltages. custom units available. safety agency approvals bvu series: ? ul 1950, thi rd edition, file #e181899. ? csa, c22.2 no.950, file #e181899. ? ce marked. stepperpower? space saving compact power module provides the stepperpower?, series pv5000 and bvu6000, is an mounting studs for motor drivers integral power supply module especially designed to the stepperpower? modules, series pv5000 and operate stepper motors. motor and logic power supplies are bvu6000, feature a transformer with high efficiency and both incorporated in one package (when applicable). excellent regulation that assures a compact physical size. models are available to drive one or two motors. the single they are assembled on space saving l- or u-shaped driver modules are assembled on l-shaped chassis with chassis.pem nuts for mounting the driver modules are threaded (# 6-32) pem nuts to mount motor driver. the dual provided on one side of the l-bracket and on the both side driver module feature a u-shaped chassis with threaded of the u-chassis. once the drivers are mounted on the (#6-32) pem nuts on both side to mount two motor drivers. power module, they become fully self-contained units this makes it an integral space saving unit eliminating the without any need of external components. the outputs are need for installing and wiring different pieces. lead wires that can be wired directly to the screw terminal connector available on the driver modules. this simplifies integral motor and logic power supplies the installation and saves wiring time. the motor and logic power supplies required to operate the stepping motors and associated control logic are both input taps to match actual line voltages incorporated in one unit. this eliminates the need to install as the motor power is unregulated, it tends to vary with and wire two different power supplies to separately the input line voltage. for example, if a high line is mounted driver modules. the motor power is unregulated applied at the 120vac tap, the motor output voltage may dc voltage; while the logic power is a fully regulated dc exceed the safe operating limit of the driver and cause output that is maintained within tight regulation ( 0.25v) damage. the taps are provided so that in high line over a large range of input ac voltage. locations, the output voltage can be kept within the safe operating limit by using the corresponding tap. the logic models to drive one or two motors power is regulated and is not affected by the input line the single motor drives are commonly used. however, in a voltage over a wide range (95vac to 135vac when multi axis-control application, the dual driver models are a connected to 120vac tap). very cost effective and space saving alternative. in the single as well as dual driver modules, the voltage and current custom designs to match other applications ratings are provided to allow maximum motor torque without powervolt will design any other custom units to match exceeding the safe operating voltage and current limits. your application. please call or e-mail us for quotes. when operating two drivers from one power supply, the effect of regenerative energy must be considered to assure safe operation of the drives.
to or de r ca l l series: bvu6000 & pv5000 tel: ( 6 30) 62 8-9 999 fa x: (630 ) 62 8-9 9 22 300 w. fa cto r y road t o ll fre e : (888) 628- 86 58 addison, il 6010 1 email: sal e s@p o we rvo l t.c o m specification : input pow e r: 12 0v ac , 5 0 / 6 0hz n o m i nal ; t a ps at 1 26v a c and 1 32v a c (op tio n a l 24 0v a c inpu t w ith tap s at 25 2v a c an d 264 v a c ) output po w e r: see tabl e at the right output rip p le: 3 % r . m. s . ma x i mu m a t n o m i n a l l i n e f u ll rated l o ad operating temperature: 0c t o 50 c ful l rat e d l o a d (de r ate 2 % per c to 7 0 c m a x. ) storage temperature: -2 5c t o 85 c humidit y : 9 5 % n on- cond en sing logic pow e r: 0.25v reg u l ation motor po w e r logic po w e r appro x imate no load appro x imate under l o ad model (vd c ) (vd c ) regula t ed (vd c ) bvu75f u 640 1 - 1 7 0 v 62v@ 5 a non e bvu75f u 640 2 - 1 70v 2 x 6 2 v@ 5a non e bvu48f u 640 1 - 1 57v 48v @ 5a non e bvu48f u 640 2 - 1 57v 2 x 4 8 v @ 5a non e bvu24f u 640 1 - 1 29v 24v @ 5a non e bvu24f u 640 2 - 1 29v 2 x 2 4 v @ 5a non e bvu80 c5 88v 80v @ 5a non e bvu80 d8 88v 80v @ 8a non e bvu13 0d5 133v 122v @ 5a non e pv520 1-1 42v 36v @ 2.5a 5v @ 250ma pv520 2-1 42v 36v @ 5a 5v @ 250ma pv530 1-1 71v 60v @ 2.5a 12v @ 25 0ma pv530 2-1 71v 60v @ 5a 12v @ 40 0ma pv540 1-1 72v 65v @ 5a 12v @ 25 0ma pv540 2-1 72v 60v @ 10a 12v @ 40 0ma pv500 0-m 71v 60v @ 1.75a 12v @ 25 0ma s u f f ix ? - 1? s p ec ifies 120v ac input s u f f ix ?- 2? s p ecifies 240 v a c i n put
|
